Furman M-8X2 15A Standard Power Conditioner

Install an M-8×2 into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.

INSTRUMENT RIGS

You’ve got a rack for your effects, preamps, tuner…You’re going to plug that into the wall? One big spike, and your rig is up in smoke. Furman’s standard-level surge/spike protection defends your gear from the spikes and surges common at gigs and practice spots. With Furman’s standard level RFI/EMI filtration, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

RECORDING

Can’t track down where that noise is coming from? Does your mix sound flat? With Furman’s standard level RFI/EMI filtration, you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it’s enough to power your whole home studio.

DJ EQUIPMENT

Bars, clubs, and other event venues have some of the worst power out there – from air compressors turning on and off to light shows pulling current loads up and down, the AC power can strain the circuits in your rig. Furman’s standard-level protection and filtration keep the bad stuff out.

PRO AUDIO

You never know what kind of power you will get when you're out there gigging. The wear and tear on mobile rigs eventually takes its toll – that’s why it’s wise to plug into Furman’s standard-level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you’re setting up a show at the local club or powering up the church band for their next service, give them power they can trust.

Furman M-8X2 15A Standard Power Conditioner features:

• Noise Filtration - AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Surge Protection - Spike & surge protection ensures equipment stays safe and your power stays clean
• 9 Total Outlets - 8 rear panel outlets and 1 front panel outlet
• 15 Amp Rating with circuit breaker
• “Protection OK” Indicator LED lets you know that your equipment is being protected
• Wall Wart Spacing Indicator - Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters

Specifications:

• Spike Protection Modes: Line to Neutral
• Energy Dissipation: 150 joules
• Maximum Continuous Operating Voltage 130 VAC RMS
• Peak Impulse Current: 12,000 amps
• Construction: Steel Chassis, Black Painted
• Family: Merit Series
• Line Voltage: 120 (Volts)
• Number of Outlets: 9
• Number of Isolated Banks: 0
• Outlet Descriptions: All 9 outlets are filtered and surge-protected
• Rack Mountable: Yes
• Rack Ears Included: Yes
• Front Panel Meter(s): No
• Front Media Light(s): No
• Control/Front panel: On/Off switch
• Voltage Regulation: No
• USB Charging: N/A
• Low Voltage Trigger: N/A
• AC Power Cord: 6 ft. captive, 14 AWG, with 3-conductor Edison Plug
• Dimensions: 19″ W x 3.75″ D x 1.75″ H
• Weight: 4.9 lbs